Reliable Wood Trusses For Over 30 Years
Share:   

CALL: (918) 473-5573
Fax: 918-473-3034
Checotah, OK 74426-9505

 

Metal Roof and Trim


Residental
Low Rib Panel Color Chart   Limited Warranty and Limitation of Liability    Energy Star Ratings        Henderson Truss Metal Color Chart

Roofing Solutions, Wood Trusses | Checotah, OK

Roofing Solutions, Wood Trusses | Checotah, OK

Panel-Loc Plus ™ is a low rib & 3/4”) panel which provides durable performance with an added striation on top of the rib that gives it even more strength. Panel-Loc Plus™ gives agricultural and light commercial projects, as well as residential roofs, the protection of steel with an attractive appearance. It is available in 26 and 29 gauge steel, as well as aluminum.

General Information

  • Panel Rib Height: 3/4″
  • Panel Coverage: 36″ wide
  • Panel Length: 26″ to 45′ in .5″ increments
  • Tensile Strength: 80,000 psi minimum
  • Substrate: Varies by option; Galvalume (AZ-50) or Galvanized (G90)
  • Gauge: 26 and 29
  • Recommended Roof Slope: 3:12 pitch minimum

Roofing Solutions, Wood Trusses | Checotah, OK

Roofing Solutions, Wood Trusses | Checotah, OK

Panel-Loc™ is a low rib & 5/8”) panel that is best used for post frame barns and buildings, as well as residential roofing. Panel-Loc™ is available in 26 and 29 gauge steel.

General Information

  • Panel Rib Height: 5/8″
  • Panel Coverage: 36″ wide
  • Panel Length: 26″ to 45′ in .5″ increments
  • Tensile Strength: 80,000 psi minimum
  • Substrate: Varies by option; Galvalume (AZ-50) or Galvanized (G90)
  • Gauge: 26 and 29
  • Recommended Roof Slope: 3:12 pitch minimum

Available Options:
Click Here To Select What Color You Would Like For Your Project

 

Commercial


R-Loc

R-Loc™ is a 26 gauge commercial panel that is an excellent choice for projects that require commercial grade performance.  R-Loc™ is designedto maximize the potential of your styructures, specifically the steel frame.  With its added purlin bearing rib, you can count on easier installation and a more pleasing appearance.

General Information

  • Panel Rib Height: 1 1/4″
  • Panel Coverage: 36″ wide
  • Panel Length: 26″ to 45′ in .5″ increments
  • Tensile Strength: 80,000 psi minimum
  • Substrate: Varies by option; Galvalume
  • Gauge: 26
  • Recommended Roof Slope:1/2:12 or greater roof slopes and ideal for low pitch commercial roofs


M-Loc

M-Loc™ is a structural roof and wall panel that can be installed directly over purlins or joists.  The M-Loc™ panel is available in 26 gauge.  This commercial panel has long served customers with lasting durability in commercial type applications.

General Information

  • Panel Rib Height: 3/4″every 6 inches
  • Panel Coverage: 36″ wide
  • Panel Length: 26″ to 45′ in .5″ increments
  • Tensile Strength: 80,000 psi minimum
  • Substrate: Varies by option; Galvalume
  • Gauge: 26
  • Recommended Roof Slope: 1:12 pitch


Horizon-Loc

Horizon-Loc™ is a durable concealed fastener roof system with easy snap together installation.  This architectural  panel system uses minimally visible fasteners, giving your building a clean, attractive finish.  The panel’s easy snap-on ribs attach rapidly with  no hand seaming, making installation less expensive than traditional standing seam.

General Information

  • Panel Rib Height: 1″
  • Panel Coverage: 16″ wide
  • Panel Length: 3′ to 40′  in 1″ increments, maximum recommended length = 35′
  • Tensile Strength: 50,000 psi minimum
  • Substrate: Varies by option; Galvalume
  • Gauge: 26
  • Recommended Roof Slope: 3:12 pitch


Precision-Loc

Precision-Loc™ is our 26 gauge commercial/industrial wall and soffit panel.  Precision-Loc™ is available with one rib (perforated or solid), two ribs (solid only) and solid flat (no ribs ).

General Information

  • Panel Rib Height: 1″
  • Panel Coverage: 16″ wide
  • Panel Length: cut to length, recommended maximum = 35′
  • Tensile Strength: 50,000 psi minimum
  • Substrate: Galvalume
  • Gauge: 26
  • Uses concealed fastener system



Central Seam Plus

Central Seam Plus™ is a trapezoidal standing seam system designed for commercial and architectural projects.  Central Seam Plus™’ mechanically seamed system begins and ends in the high, reducing the risk of leakage at the rake.

General Information

  • Standing Seam Height: 3″
  • Panel Coverage: Available in:
    • 24″ with minor ribs – prepunched 6 holes or no punching
    • 18″ with minor ribs – prepunched 5 holes or no punching
  • Panel Length: 26″ to 45′ in .5″ increments
  • Tensile Strength: 50,000 psi minimum
  • Substrate: Galvalume
  • Gauge: 24 (22 and 26 gauge material optional.  Contact sales rep for more information.)
  • Sealed with a superior factory-applied hot-melt mastic


Central-Loc
Central-Loc™ is a snap-together trapezoidal roofing system that is an excellent choice for commercial applications.  Central-Loc™ is manufactured from Galvalume which offers two to four times the corrosion resistance of galvanized steel.

General Information

  • Standing Seam Height: 3″
  • Panel Coverage: Available in:
    • 24″ with minor ribs – prepunched 6 holes or no punching
    • 18″ with minor ribs – prepunched 5 holes or no punching
  • Panel Length: 26″ to 45′ in .5″ increments
  • Tensile Strength: 50,000 psi minimum
  • Substrate: Galvalume
  • Gauge: 24 (22 and 26 material optional.  Contact sales rep for more informaton.)
  • Recommended Roof Slope: 1/4:12 pitch
  • Sealed with a superior factory-applied hot-melt mastic


Central-Snap

Central-Snap is a vertical 1 3/4″ snap-lock standing seam panel system that is sturdy and fire resistant, making it ideal for architectural and commercial applications. Installation is a snap, and its Galvalume substrate offers two to four times the corrosion resistance of galvanized steel.  24 Gauge Flat Sheets are also available.

General Information

  • Standing Seam Height: 1 3/4″
  • Panel Coverage: Available in 16″ coverage with subtle striations between ribs
  • Panel Length: 36″ to 52′ in .5″ increments
  • Tensile Strength: 50,000 psi minimum
  • Substrate: Galvalume
  • Gauge: 24 (22 gauge material optional. Contact sales rep for more information.)
  • Factory-applied hot melt sealant is standard.
  • Available with a 1 3/16″ notch at one or both ends of each panel for the ease of turning under; reducing installation labor and costs.
  • Recommended minimum slope:  3:12